Features
- 2.4 – 2.7 GHz Operation
- 15 W Typical Output Power
- 21 dB Gain at 2.5 W PAVE
- -38 dBc ACLR at 2.5 W PAVE
- 32% efficiency at 2.5 W PAVE
- High degree of APD and DPD correction can be applied
CGHV27015S
15 W; DC - 6.0 GHz; 50 V; GaN HEMT
Wolfspeed’s CGHV27015S is an unmatched; gallium-nitride (GaN) high electron mobility transistor (HEMT) designed specifically for high efficiency; high gain and wide bandwidth capabilities; which makes the CGHV27015S ideal for LTE; 4G Telecom and BWA amplifier applications. The CGHV27015S GaN HEMT devices are suitable for 3300-3500MHz; 4900-5900MHz; 700-960MHz; 1800-2200MHz; 2500-2700MHz and extended S and C Band applications. The CGHV27015S operates from a 50 volt rail. The transistor is available in a 3mm x 4mm; surface mount; dual-flat-no-lead (DFN) package.
Products
CGHV27015S
No filters selected, showing all 1 products
CGHV27015S
Product SKU | Buy Online | Data Sheet | CAD Model | Recommended For New Design? | Technology | Frequency Min | Frequency Max | Peak Output Power | Gain | Efficiency | Operating Voltage | Form | Package Type |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
CGHV27015S | Yes | GaN on SiC | DC | 6 GHz | 15 W | 21 dB | 32% | 50 V | Packaged Discrete Transistor | Surface Mount |
Applications
- LTE; 4G; Telecom and BWA Amplifiers
- Tactical Communications
- CATV; UAV data link
Documents, Tools & Support
- Technical & Sales Documents
- Tools & Support
- Compliance
Documents
Document Type | Document Name |
|---|---|
| Design Files | |
| Application Notes | |
| Application Notes | |
| Application Notes | |
| Data Sheets | |
| Technical Papers & Articles | by Raymond S. Pengelly – William Pribble – Thomas Smith
This Simulation of power amplifiers (PAs) for modern wireless base station and small cell systems is an essential part of the design process. At a cell site – the PA consumes the bulk of the dc power – generates the most heat – and thus represents the greatest operational cost. Maximum PA efficiency is a necessity to manage these costs – which is a sizeable challenge in a PA that also must be highly linear to support the complex multilevel modulation types and wide bandwidths used for current and developing wireless transmission standards. Accurate simulation allows the PA designer to meet these challenges by exploring the available design options and then optimizing the circuit that is selected for the application.
|
| Technical Papers & Articles | by Donald A. Gajewski – Scott Sheppard – Simon Wood – Jeff B. Barner – Jim Milligan – and John Palmour.
This paper discusses the reliability performance of Wolfspeed GaN/AlGaN high electron mobility transistor (HEMT) MMIC released process technologies – fabricated on 100 mm high purity semi-insulating (HPSI) 4H-SiC substrates.
|
| Product Catalog | |
| Sales Terms |
Knowledge Center
Continue Reading Technical Articles
Wolfspeed RF GaN meets 5G demands on PA design
Wolfspeed GaN on SiC products can replace inefficient silicon parts in 5G cellular transmitter amplifiers, achieving higher linearization, greater power density and improved thermal conductivity.
Continue Reading Technical Articles
SiC vs GaN vs Si: Find The Right Fit For Your Application
Explore Wolfspeed Silicon Carbide Power and GaN on Silicon Carbide RF solutions to enable your high performance systems.
Continue Reading Infographic